The cone is fully opaque now: solid colour, deep blue at the edges and near-white
down the core, dimming as it runs away. Depth is carried by BRIGHTNESS instead of
by alpha, so it still reads as receding without anything showing through.
That settles an argument the translucent version could not win. Its opacity and
how well you could tell above-the-plane from below-the-plane were the same dial
pulling opposite ways: readable enough to show the split and it veiled the whole
cone, subtle enough to look right and there was nothing to see. Solid, a body
above the plane is drawn on top of it and a body below is hidden behind it. The
trade is that you cannot see the crowd through it, which is the thing to judge on
the phone.
The `alpha` parameter went with it rather than being left in the signature lying
about what it does.
laserScene is gone. T.pause(true) stays -- it freezes the world but keeps drawing,
which is worth having whenever a still is what you need to look at.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
T.laserScene() (or #laser on the URL) drops into splatter with six bodies of
different types at known depths, the laser armed, a pull held, and the world
paused.
T.pause(true) freezes the WORLD but keeps drawing, which is the whole point: a
value changed in devtools shows on the next frame while the scene stands still.
The old recipe halted rAF, which freezes the picture too and is no use for
judging how something looks.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Lower alpha through the whole fill (0.34 -> 0.19 at the strings, falling with
depth) and the core is a LIT BLUE rather than near-white, which is what was
washing it out. The stroked edges come down and turn blue with it.
Worth recording, because it will come up again: the cone's opacity and how well
you can tell above-the-plane from below-the-plane are the same dial. The plane is
flat -- a body above it is drawn clean on top, a body below is seen through it --
so the distinction just IS the cone's alpha. Fainter cone and sharper split pull
against each other; the fainter cone wins and the cut line carries the signal.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The blinking was drawZombie validating its frame count against the LAST frame
only: a set with (say) z_h2 missing but z_h4 present kept N = 4, the walk cycle
stepped onto a name that had never loaded, and drawStatic silently drew nothing.
The body vanished for that frame of the cycle and came back on the next one,
forever. One cached 404 -- this project's oldest trap -- is enough to cause it.
It holds frame one now: a body that stops animating is a bug you can see, one
that flickers in and out reads as the game breaking. SPRV bumped to flush
whatever his phone has cached.
And no ctx.filter anywhere. The cut line was briefly the sprite redrawn clipped
to a band and flattened by a canvas filter, which put it exactly on the
silhouette -- and on the iPhone the line did not draw at all. Unsupported or
leaking past its restore, a rendering feature that fails silently on the target
device is not worth a pixel of polish. It is a plain bar again, brighter, and it
crosses the odd gap between the legs, which is the trade.
The cone gets the reference's look: a horizontal gradient across the width with a
near-white core down the centre line falling to blue at the edges, plus the depth
falloff along its length, plus stroked outer edges. Canvas has no 2D gradient, so
it is filled in eight slices each carrying its own across-gradient -- enough that
the seams vanish, which is what the old nested wedges got wrong.
Test mode: barrels gone (the rack already holds everything they would give you)
and the crowd raised to 16 bodies at a spawn every 0.9s, so it does not run dry
between kills.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The beam is a real plane now, holding TUNE.beamY (1.15 m) all the way out instead
of sloping to the ground. That one change is what makes the rest possible: sloping,
it lay flat on the grass across the whole far half, so there was nothing to cut
exactly where the crowd stands.
One flat translucent triangle, apex at the player's CHEST, opening out down the
court with the alpha falling away. It was four nested wedges composited 'lighter'
and that layering WAS the banding -- additive light blowing out to white where the
layers overlapped. Flat alpha also means a body under the plane is tinted rather
than brightened, which is what lets the cut read at all.
Bodies are sliced by it: the part above the plane is redrawn clipped so it sits on
top, the part below stays tinted underneath, and it happens while AIMING as well as
on the shot. Measured, the plane takes a shambler at 64% of its height, a brute at
43% and the roller man at 36% -- bigger bodies visibly take it lower.
The cut line follows the SPRITE rather than a rectangle. A fillRect spanned the
body's bounding width, so it crossed the gaps between the legs and under a held-out
arm and read as a bar lying behind him; the line is the sprite itself, redrawn
clipped to a thin band and flattened to one colour by ctx.filter. It thins with
distance on s squared, because this camera's scale only spans about 1.5x across the
court and a linear falloff was invisible.
Aiming a filter at a specific colour turned out to be a measurement, not a guess:
brightness(0) invert(1) goes to WHITE, and sepia adds almost no chroma to white, so
the first chain rendered a grey. Leaving a mid grey for sepia to tint lands on
(32,154,255) against the laser icon's (29,153,232). The probe fills a rect and reads
the pixel back.
The pass is bounded to the eight nearest bodies above 14 px, because it draws each
one twice more through a filter and runs every frame you are aiming. 0.27 ms/frame
with 20 bodies on desktop, against a 16.7 ms budget.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The mg racket is gone, not moved. It was a procedural racket drawn over a sprite
that already holds one: straight up-court it projected onto the player's back as
a floating oval, and offset to the side it just stuck out.
The laser's far edge was pinned to the middle of the ad strip two commits ago and
nothing appeared to change, twice. The geometry was always right -- each wedge
layer faded to alpha 0 along its length, so the beam went invisible before it
reached its own far corners and the VISIBLE end sat well short of the pinned one.
The far stop is lit now, so the two are the same line. Verified by recomputing
the projection: far corners at y 113.8, the ads' middle, against 110.2 unpinned.
It also falls off with distance now, brightest at the strings and thinning down
the court -- but never to zero, which is the trap above.
Fixes a third instance of the empties-under-the-iterator bug: a rocket blast can
bank the last kill of a game, and the duel or chapter boss that follows clears
pellets[] mid-loop. shots, pellets, extras and the body loop all carry the guard.
Also records that two consecutive render() calls do not produce the same frame --
render mutates camera smoothing as a side effect -- so frame-diffing to find where
something was drawn measures the camera drift instead. It claimed the beam reached
16 px above where its own geometry could go.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A burnt body does not burst. Fire kills by cooking, so there is nothing left to
spray: a body that dies alight -- flamethrower or flame ball -- leaves dark grey
ash instead of blood. Same decal, mound and particles, recoloured and smaller,
with a puff of smoke and a dull thud instead of the wet splat and the headshot
crack. The flame BALL has to mark itself, because that kill lands before the body
ever catches.
The flamethrower is a lighter, not a gun: no impact damage at all, it pierces,
and it only IGNITES -- the burn does the killing, so a lit crowd walks a few
steps and goes down together. 26 m of reach against a 22.8 m court, so it
crosses to the far baseline. The guard matters: hp -= 0 fell straight through to
killZombie, which made the cone delete the crowd on contact.
Every burst weapon had no progress bar and the cause was the spend. Arming spent
the tin at once, so the rack entry vanished -- and the bar draws on the slot
holding G.gunId, which no longer existed. The tin is spent when the burst ENDS
now, so icon, count and bar are all there while it runs, and every path that
ends a burst routes through endBurst or it would hand out free ammo.
Auto-fire movement again: the previous fix read moving as mx||mz||assist, and
finger-steering zeroes mx/mz, so sliding left and right still counted as standing
still. And the oval on his back was the mg racket -- its head projected almost
exactly onto the sprite; offset by facing it reads as held out beside him.
The laser's far edge is pinned in SCREEN space to the middle of the ad strip
rather than running out to beamLen on the ground, which landed on their top line.
beamLen goes back to being the kill range instead of a number tuned to one camera.
Beacon thumps, rocket swooshes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The auto-fire jog was one guard. gameplay skipped the pose update in mgSteer mode,
so the pose stuck on 'idle' -- and render covered for it by faking a run cycle off
G.idleT, which animated whether he was moving or not. That fake is what read as
"this hectic run animation... odd all the time". The pose follows MOVEMENT in every
mode now and the fake is deleted, so auto-fire, the horde and the melee racket all
use the ordinary run animation and standing still is standing still. The comment
that justified the fake -- two rackets when idle -- was solving a smaller problem
than it caused; at sprite scale the overlap does not read.
The laser, second pass, all of it "it must read as light he fired":
- it draws AFTER the net and every body. It was drawn before the far-side pass,
so the net and the crowd painted over it, which is exactly why it looked like
it was lying on the floor and sitting under the net.
- beamLen 26 -> 34: at 26 it stopped just past the far baseline and read as cut
off in mid-court. It carries into the courtside ads now.
- beamW0 0.35 -> 0.06, a POINT at the strings. At 0.35 it left the racket as a
0.7 m bar hanging in mid-air instead of something emitted from it.
- it DELETES ordinary bodies, hp irrelevant. A plane of light that left a roller
man standing made it a worse ball, not a weapon. A boss is the exception and
takes dmgBeam 8 -- severe, survivable.
- four nested wedges composited 'lighter' (violet bloom, blue, cyan, white core),
each fading along its length. One quad with a gradient was a coloured shape.
Rocket: speed 17 -> 38, and a real jet plume laid tight ON the flight line rather
than scattered sparks, which looked like a firework.
Beacon: a finer one-pixel thread and a much brighter ball, so the BALL is the
bright thing and the trail only says where it has been.
And the bug in the middle of that: firePellet stamps a whitelist of fields onto
the round, and jet/trailR went onto the WEAPONS rows without being added to the
list -- so the rocket flew with no plume and nothing errored. Any new pellet field
has to be added in both places.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A test mode for trying the new content without playing twenty games to reach it.
Three taps on the scoreboard toggles it, three more turns it off, and a single
tap is still the miss-log overlay. Same shape as the umpire triple-tap cheat it
sits next to.
It OVERRIDES the difficulty director rather than editing it, so the wave is the
same whether you opened it in game 1 or game 40 and the run keeps running
underneath: 8 bodies, a fixed 1.15 m/s shamble, a spawn every 1.6 s, and
pickVariant pretending to be at game 20 so every body type can turn up. All four
barrel weapons sit on the rack and are topped back up each frame, because
committing a burst spends the whole tin and a sandbox that runs dry is not one.
A barrel rolls out every 14 s so the pickup itself is testable too.
The third tap must NOT toggle logShow: taps one and two already toggled it twice
and it is back where it started, so toggling again left the miss-log overlay
switched on behind you every single time.
Also records the trap that cost a debugging round getting here: index.html loads
main.js?v=N, and fetching 'main.js' does not bust that URL -- so main.js stayed
stale through a reload while every other module was fresh, and the tap handler
appeared to do nothing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Oliver's playtest of the barrel weapons. Four notes, all four real defects.
"The bigger guys were way too easy to kill at the beginning." A bug, and an old
one. The ball-vs-body chain handled boss, g/m, s, f and a/b, and everything NOT
named in it fell through to "splat-quality kills outright" -- so the STEWARD has
died to one serve since the day he shipped with stewardHp 5 and a comment calling
it a brute's worth of hp, and the three new bodies inherited that the moment they
existed. Pellets and melee always read hp; only the ball skipped it. One generic
hpMax > 1 branch now, and measured after: shambler 2, steward 5, brute 5, ball
boy 3, bouncer 5, roller man 7 -- each exactly its hp.
"I have seen all of them by round 10." The new three move 3/8/15 -> 5/12/20. The
original four keep their gates: that curve was already tuned through game 12.
"The laser fired only when I tapped, that was confusing." The whole tap-per-round
kind is gone. A barrel weapon is now either the normal ball gesture made
spectacular or something that fires itself -- nothing waits for a tap.
- laser is a serve, and the RAY is the weapon: no ball anywhere in it. The
preview IS the wedge, it leaves the RACKET rather than lying on the grass, the
release erases the plane along its own path behind a bright front, and the
edges are hairlines instead of the heaviest lines on the court.
- beacon and rocket are LOBBED bursts -- `arc` turns a flat pellet into a thrown
one, solved onto the nearest body ahead, and landing is itself a hit so a
rocket that misses still goes off where it lands. The beacon changes colour
every ball and drags that colour behind it.
- flamer got "way more pronounced": 30 rounds/s, a ~10 m cone, embers.
"I got the laser almost every time." A flat 1-in-4 over four items does not feel
uniform. BARREL_WEAPONS carries weight and a `from` gate now, never repeats twice
running, and the beacon is what you meet first. Measured: laser 16-28%, rocket
unlocked at game 12 so it is genuinely a late find.
And the barrel keeps its pink halo -- that was always procedural, painted by
drawBarrel, and never went near the chroma key. Three rings and a pool on the
lawn now, because one flat disc read as a smudge.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The rack had five hardcoded slots where the index WAS the weapon, spelled out in
five places: SLOTS, slotStock, WDESC, drawRack's three parallel arrays,
deliverTin's w+1, and bare wsel === 1|2|3 / G.weapon === 4 tests across five
files. config.WEAPONS is the one table now, G.rack holds up to four {id, n} in
the order you GATHERED them, and slot 0 stays BALL. Everything reads through
slotId/slotStock/slotEntry, so nothing else knows how the rack is stored.
A fifth weapon is always allowed, per Oliver: it rides slot 0 as G.temp until
spent, then slot 0 goes back to the infinite ball. A barrel arms on the spot and
is spent quickly, so refusing it would mean a barrel you shot did nothing. And a
spent weapon LEAVES its slot -- with gathered slots, an exhausted weapon holding
one is a quarter of the rack you can never pick up into. (The old rack kept its
empties dimmed, which was right when a slot meant "BOMB goes here".)
Four new weapons, and they are all the ONE existing pellet loop. firePellet(w)
stamps the WEAPONS row onto the round -- r, dmg, hp, pierce, boom, ignite, col,
speed, life -- so the beacon cannon, flamethrower, laser and rocket needed no new
array and no new update; the break after the first body was the only thing making
a pellet single-target. All four go through the same isBoss branch, which is why
none can silently no-op on a boss the way three of five once did. Measured:
gun/beacon/laser/rocket reach past 16 m, the flamer is a ~6 m cone that ignites.
G.mgT stays the mode timer for all of them, so the eighteen !(G.mgT > 0) guards
across five files did not have to change. kind:'burst' auto-fires at its own rate
for len seconds; kind:'shot' holds the same braced stance and fires one per tap.
The barrels reuse the ball machine's shape: a rolling, shootable non-body. All
three of the registrations that fail silently are done -- blocksClear (loot must
not gate the hand-clear), the contact guard (furniture cannot eat you), and
hitR/GORE_MUL/zombieH. It scores nothing.
The pink had to become procedural. The chroma key deletes every pixel where red
and blue both beat green by 40, so a magenta drum and a magenta laser pistol both
came back as hollow outlines -- 19% and 15% solid against 50-56% for the icons in
other colours. The drum is grey steel with hazard chevrons and every bit of its
pink is the halo drawBarrel paints; the laser went electric blue. Both are solid
now (92% and 58%), and the rule is written down in HANDOFF.
tinTriples 3 -> 10 as asked, and the four dead TUNE ammo constants are gone --
nothing read them once the table landed, which is a panel value you can tune all
day for no effect.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A chapter boss had no AI at all: it matched no branch in the variant chain and
fell through to the crowd's aimless wobble, so "the boss AI owns its x" was a
comment describing code that did not exist. Movement is now data on the BOSS_ART
row -- pace, shadow, surge, charge, bounce -- and bossAI is the one place it
happens. Every behaviour field is optional, so a row carrying only art behaves
exactly as a boss did before.
Three earlier drafts of those styles failed the same way: written as "walk toward
the player's x", which in splatter means arrive in four seconds and stand still,
because the player is rooted in pretoss for nearly all of a boss fight. Every
style now moves under its own power and only biases toward him. Measured over a
simulated minute each: 50-136 m travelled, none static.
Three new designs -- THE HEAD COACH (a 5-shot drill 0.14s apart), THE PHYSIO
(charges, and withdraws less than it charges, so it reaches you at 38s and that
is the fight's clock), THE SPONSOR MASCOT (gap 0, so the whole wall of five
leaves in ONE frame and is dodged rather than parried). Harder to kill: 16 -> 20
hp, 9 -> 10 per chapter, plus per-design multipliers.
Three new bodies: the ball boy (3 hp, 2 skins, from game 3), the bouncer (6/3,
game 8) and the roller man (9/4, game 15), each with a 4-frame walk and a drawn
two-frame lurch for every wound stage.
Three wound rules became one. The brute had a hardcoded stage array, everything
else a single skin behind 'abd'.includes(...), and the boss a fraction of hpMax.
The boss's rule reproduces the other two exactly -- verified: the brute still
draws z_gw/gw2/gw3/gw4 at hp 4/3/2/1 -- and keeps working when hp is not
one-per-skin, which all three new bodies need. So a multi-hit body is now a row
in config.ZWOUND and no code. bleed() reads the same call, which also gave the
steward the trickle his wound skin had always implied.
Fixes a real crash on the way past: killPlayer empties shots[] while the shots
loop is mid-iteration, so every remaining index read undefined and the frame
threw. The mascot's five-at-once volley makes it easy to hit; the shipped 3-shot
volley could always have hit it.
_regen.py gains two style blocks and a check tier. One constant used to say
"keep every colour exactly as the reference" -- right for a remaster, and it
fights every word of the subject otherwise. newart is for a new character, state
for the same character wounded or mid-throw; using newart for the wound sheets
licensed a repaint and got one, five came back with living tan skin. And the
detail gate ratchets against the file it replaces, so check: any exists for
re-rolling already-fine art to fix something the gate cannot see, such as colour.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Menu theme 0.5 -> 0.65.
The gold frame comes off START GAME — both buttons share the one slate border
now, so the pair reads as a pair, and a light sweeps across the START plate
instead: over in ~0.8s, then still for the rest of a 4.5s cycle. The sweep is a
::after with pointer-events:none so it can never eat the tap, and it is off
under prefers-reduced-motion.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The menu stage was the same logo on the same backdrop with two buttons, so it
read as the title screen failing to advance. The buttons move onto the title
screen in place of the control list, which is the tutorial's job now.
Death no longer reloads the page. The reload was an honest full reset, but it
also tore down the AudioContext — so the theme restarted from silence every
time you died, when it should carry straight on from the death summary into the
title screen. restartRun() puts G, P, O, ball and score back from a
structuredClone taken at module load (all plain data, so the clone is the whole
job and a field added later is covered for free), and the two modules with
timers of their own reset themselves: every zombies array plus spawnT/moanT/
mgTick, and input's held keys and half-finished drags, which would otherwise be
inherited by the next run's first frame.
The overlay is hidden rather than removed so it can come straight back, which
needs its own [hidden] rule to beat the display:grid on #intro.
The theme starts on the first tap and never restarts: loopBed's beds.has guard
already makes every later menuMusic() a no-op.
Verified: one background-music fetch across launch -> run -> death -> title ->
second run, and a full second run through the transition after the in-place
reset.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The logo now sits exactly as it does on the title screen — same width, no menu
override — with 30px under it so the blood running off its bottom edge stops
touching the first button.
That button also had no top border to cut into: the crop was a BOTTOM band of a
taller plate, so it carried the plate's bottom border and nothing above. Both
plates are cropped to their interior now and CSS draws one consistent frame on
each, gold for START and slate for TUTORIAL.
Lettering stays live text and goes to 15px with wider tracking.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The tutorial was borrowing a court tile, the in-game how-to icon and a weapon
icon, none of which were drawn to be looked at. Four purpose-made 2:1 panels
now: the serve with a tapping hand, the slingshot pull with chevrons into a
zombie, the weapon rack, and the floodlit duel. They get the full card width
above Marvin instead of being squeezed into the text column beside him.
The menu wears the title logo instead of a Silkscreen headline, and the two
buttons wear generated plates — START GAME bloodied, TUTORIAL nearly clean.
The lettering stays Silkscreen on top: generated type is a lottery and would
not match the rest of the HUD.
Two things the art needed. Quantise the panels at 128 colours, not 64 — big
flat fields with saturated accents is where a small palette shows, and 64
turned the tennis ball beige. And find a plate by its BRIGHT BORDER, never by
the corner colour: one plate came back on a near-black margin, the other on a
transparency checkerboard that differs from itself everywhere and matched the
whole canvas.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The overlay is a four-stage machine now — splash -> menu -> {courts, tutorial}
— swapped by data-stage while the backdrop and card frame stay mounted, so the
live court never flashes through between screens.
Court tiles SELECT only. Tapping one used to start the match on the spot, which
gave you no way to compare the three and no way back out; START GAME and BACK
are their own buttons now. Headlines are 15px against the 11px body, so a screen
reads as a screen rather than as a list.
The tutorial is a data table: a Marvin pose, an optional picture already in
assets/, and his lines. Seven pages covering tennis, the turn, the slingshot,
the rack and the duel. Marvin is four new frames off x_boymop1 — waving,
pointing, shrugging, and clutching his mop in terror.
The theme no longer starts at boot. A title screen that plays at you before you
have touched it is rude, and the autoplay policy would have held it silent until
that first tap anyway.
Death returns to the menu instead of the title. The reload stays — it is the
honest full reset — and a sessionStorage flag is what picks the stage on the way
back in.
Machine-gun rounds are tennis balls, so they are drawn as balls and take the
perspective. A fixed 4x4 fillRect was exactly as big at the far baseline as at
your feet, which read as square confetti pinned to the screen.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The NEXT/GAME row was bare text on the court. That was legible over one dark
green lawn and is not over a sunlit clay crowd or a floodlit blue one, so it
gets its own rounded panel — the same thing the scoreboard art above it already
relies on. It states the sets banked now too; they had only ever appeared in the
scoreboard's own per-row column.
The weapon rack's five slots are rounded, which is what they are: buttons.
The duel is played under tennis rules — no slingshot, no rack, serve to the box
(see the !G.interlude guards in solveShot and the aim reticle) — but the bottom
hint was still telling you to pull back to aim, which is the one thing that does
nothing there. It reads as a tennis serve now.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Every roll drifts the palette and nothing measured it: a white headband on six
frames, pale grey shorts on the toss twice, brick-red shirts and brown shoes on
the swing all sailed past --tries. check: "same"/"loose" skips colour_match, and
colour_match is a global mean/sd fit far too weak to pull brick-red back to red
— a nearest-colour palette lock is worse still, it drags the duller reds into
the racket's browns.
So _regen.py measures three numbers and a batch opts in with palette_ref:
redness (r minus mean(g,b) over saturated warm pixels — brightness alone cannot
tell brick-red from red), shorts brightness (charcoal 61 vs the drift's 83), and
the near-white fraction that is the shoes and socks (brown drops it to 0.9%,
pale shorts push it to 7.9%, correct frames sit at 2.8%). Frames known to be
right cluster tightly on all three; every drifted frame fell outside on at least
one. It rejected five bad rolls in a row, then passed a good one.
The swing also kept re-inheriting its own drift: ref_sheet is built from
[lead] + the sprites being replaced, so it was showing the generator the very
brick-red frame it was about to overwrite. Copying a canonical frame over the
targets first breaks the loop — it passed on the next roll.
Swing is now a real backswing and follow-through (silhouettes differ by 1.0,
racket low behind vs up over the shoulder), both at full standing height, and
the toss and smash wear charcoal shorts again.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The "smaller when swinging or tossing" was an anchor bug, not art. _fine.py
scales a whole sheet so the --anchor frame is 224 px, and drawChar draws every
sprite at img.height/SPRITE_H — so anchoring opponent_play on the TOSS, with
arm and ball above the head, made 224 px cover the raised arm and shrank every
body on that sheet. o_swing1 was 162 px against a 224 px standing pose. Each
opponent batch now leads with a standing `ref` frame, which _fine.py anchors on
and _regen.py discards. Correctly anchored the toss is 278 px and the man is
full size; the swing is 221.
The receiver no longer slides 0.12 m side to side while waiting on a serve —
sliding a sprite sideways reads as skating, and the split-step swap to the run
frames (removed earlier) had already been the other half of that.
The idle bounce ball had one hardcoded offset for both men. They reach to
opposite sides of the screen — the player is drawn from behind, the opponent
from the front — so the opponent's ball sat out by his racket. dx and apex are
per-man now, and o_bounce/o_bounce2 were redrawn with a patting hand to put it
under.
Also: the opponent wears a RED headband, and a prompt of mine that said "white"
had quietly repainted it on six frames.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
zombie-mode: 5.9 MB of 24-bit WAV down to 287 KB. Its master is 982597 frames
at 48 kHz, so loopEnd is the un-round 20.47077 — the decoder hands back
20.4787, and those 7.9 ms of AAC padding would tick once a loop. Nothing in
assets/audio/ is a multi-megabyte WAV any more.
o_run1/o_run2 had no racket in either hand. The cause was the batch prompt:
opponent_run never said "racket", and its reference sheet was built from the
racket-less frames it was replacing, so there was nothing to copy one from. It
is a ref_only batch off o_idle1 now — same man, front-facing, racket in his
right hand — with the subject spelling out that he still carries it mid-stride.
The stride reads as well as the old one did.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
8.3 MB of WAV down to 768 KB, on a file that downloads on every page load
before the player has decided to play anything.
loopBed takes the full filename now, because the beds are a mix of .wav and
.m4a — fadeBed's key has to match it exactly, extension included, or a duck
silently no-ops.
It also takes an explicit loopEnd, and the theme passes 48. AAC pads its last
packet, so Chrome decodes this 48.000s master to a 48.0174s buffer: 17ms of
silence spliced in at every seam, once a loop, on the title screen. Trimming
the seam is what keeps the loop seamless.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
background-music.wav loops under the title screen and the court picker, ducks
out when a court is picked, and fades back in at the death summary — the end
screen is a menu too, so the zombie bed ducks out as this one comes in.
It starts at BOOT, not on the first tap, so the title screen already has music.
That needed loopBed to call audio() before its already-started early return: the
theme plays into a context the autoplay policy holds suspended, and the call
that wakes it is a second menuMusic() from the first tap, which used to return
at the beds.has guard without reaching AC.resume().
fadeBed also now records a duck for a bed that is still loading, and loopBed
starts that bed silent. An 8 MB file ducked mid-fetch would otherwise come up at
full level, seconds later, over the match. Same latent bug applied to zombieDuck.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Three courts, picked on a second start-screen stage: CENTRE COURT (grass),
TERRE ROUGE (clay) and THE SLAB (hard). A court is a row in config.COURTS and
four PNGs — render() never learns their names.
Each row carries two palettes, because every court still rots: what "drained"
means on orange clay is not what it means on green lawn. Mow stripes became a
flag rather than a colour — recolouring the lawn and leaving the bands on still
read as grass. Bounce is two numbers copied into TUNE on selection, so the three
bounce sites in gameplay.js and the T panel stay untouched: grass skids low and
fast, clay sits up and drags, hard is the old baseline.
Per-court crowd sheets and ad strips. Each court's clap frame is generated from
its OWN seated sheet, not from x_crowd2 — pairing one court's crowd with
another's applause cross-fades between two different crowds.
The picker is a second panel in the existing #intro overlay, rows built from the
table. Last pick is remembered and comes up pre-highlighted; 1..N or Enter on a
keyboard.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Oliver, after playing the four-stage version on the phone: idle, then the racket
dropping on the pull, then the drive on release — "that's all, forget all the
others". At thumb speed the middle stages are never read, so they are deleted
rather than kept around: p_pull is the wind-up, p_smash is the drive, and both
come out of the photo-referenced sheet, so the whole serve is one drawing style.
The dead batches and the arm_left guard go with them. assets/_pose_ref_serve.png
is kept as the recipe: his photo sequence over our own sprites, which is what
turned a fifteen-generation prose argument into one generation.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Oliver's idea, and it is the fix for the process as much as for the frames: give
the generator the real serve sequence as an IMAGE and let it copy the poses,
instead of describing a pose in prose and re-rolling until it lands. One
generation — a composite of his five photographed frames over two of our sprites
— returned a magenta row of the whole serve in the game's own character and kit.
The four stages are sliced straight out of it, anchored on the standing figure.
_fine.py gets --defringe: its two de-fringe passes each eat a one-pixel line, and
a racket frame IS a one-pixel line — that is what had been leaving the men holding
a grip and nothing else.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The racket kept changing hands because the art disagreed with itself: p_idle,
p_bounce and p_toss held it in his LEFT hand while p_smash and p_swing used his
right, so every new frame copied whichever reference it was handed. The idle, the
bounce pair, the toss and the four wind-up frames are all regenerated with the
side named — drawn from behind, his right hand is the right-hand side of the
image, and only the racket HEAD crosses behind his back.
What separates the four wind-up stages is how far the racket has fallen, and that
needed the racket head pinned to a body landmark per frame — above his head,
beside his ear, between his shoulder blades, at the back of his thighs. Described
as "further into it each time" it drew four near-identical poses twice running.
They are wired late in the pull, Oliver's call: frame 1 owns the first half and
the three coiled frames are packed into the top half.
assets/_derive.py is deleted. Fixing generated art by mangling it afterwards is
always worse than regenerating; three guards in _regen.py turn the bad rolls that
used to install silently into automatic re-rolls — a portrait reference canvas
(the generator answered with a 2x2 grid), a non-magenta background (a green sheet
keyed away four racket heads), and a mirrored frame.
The bounce pair is one drawing from one sheet now, differing only in the free
hand, so BOUNCE_IDLE moved to his left side and was re-measured off the sprite.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Four new frames (p_pull1..4) turn the slingshot drag into the serve's wind-up:
racket above the head, behind the head, behind the back, fully coiled, picked off
pullFrac — the same 0..1 that sets the shot's power — so the gesture and the man
are one movement and the release snaps to the smash.
The two bounce frames are one drawing now. p_bounce2 is p_bounce with the free
arm sheared up 12px and nothing else touched, so the swap cannot flicker, and it
follows the ball instead of its rising phase; BOUNCE_IDLE was re-measured off the
sprite so the ball tops out under the palm. p_toss had the tossed ball drawn into
it — cut, canvas height kept, because the game scales him off img.height.
The runner: hip centres sat -2.0/+7.1/-6.0/-0.1 px off the sprite centre, a 13px
lateral jump at 12 frames a second, and Oliver's diagnosis was right that all four
frames leaned the same way and lifted the same leg. Frames 3 and 4 mirrored, all
four padded to one width with the hip on the centre line.
assets/_derive.py holds the three derivations, since "the same drawing with one
small difference" is the one thing the generator cannot draw.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Oliver spotted it before testing: a whole-frame mirror swaps the DRAGGED POLE
into the other hand as well as the legs. True for the one wound stage that still
has an arm holding something, so that stage gets a leg-band mirror about the hip
centre instead — legs swap, pole and stump stay put. The other three stages have
no arms and no props, so a full mirror is right for them.
The honest cost: a leg mirror leaves both feet in the same two places, so that
one frame reads as a leg swap rather than a stride. Written up with the fix that
worked for the shamblers (a passing pose, feet together) and the measurement that
tells them apart.
HANDOFF gets the session: what changed, the two lessons that cost the most (the
prompt sets the art resolution; the reference sheet is what the generator
copies), the rule that anything which must stay identical between two frames
belongs in code, and the four known limitations ranked for whoever picks it up.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
All four stages drawn from the healthy body in two sheets, so he keeps the same
bulk the whole way down instead of slimming as the wounds get worse — one arm and
his pole, both arms, ribs open, then headless.
The second frame of each stage is now a MIRROR of the first, not a generation.
Every attempt at drawing them moved the injury between the two feet — this is the
third fix for the same complaint — and a mirror physically cannot: the wound
stays on the same part of the body, and flipping a standing figure IS the stride
swap the B frame exists for.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Oliver had the diagnosis exactly right: the raised racket is part of the sprite,
so the toss and smash frames were 29% racket by height — and the game scales a
sprite off its TOTAL height, which shrank the body to fit. Measured 71% body
against the standing frame's 98%. Both are scaled so the BODY lands at standing
size and the racket now extends above the frame instead of squeezing him into it.
The bounce frames are redrawn too: racket in the left hand, right hand empty and
reaching down to the side the game actually drops the ball on, and no ball drawn
into the sprite at all.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The generator drew the second frame of that wound stage as a MIRROR of the first,
so the missing arm and the dragged pole swapped sides on every step — which is
the "wound on the left arm on one foot but not the other" Oliver saw, and it was
on the sheet, not in the frame assignment. Flipping the frame back puts the
injury where it belongs, and a horizontal flip IS the leg swap a second stride
frame wants, so the walk still reads.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The playtest list, art side. The generator had been copying the very frames I
wanted changed, so:
- The player is drawn FROM BEHIND again in every pose — standing, bouncing,
serving, swinging. He had turned to face the camera in the redraw, which is
also why he "looked at you" in different poses.
- The serve frames are back at full size. That batch had been anchored on the
toss frame, so the whole serve set came out about a fifth too small.
- The runner CHARGES AT YOU down the court instead of sprinting sideways across
it, which is what he actually does in the game.
- The brute's wound stages are drawn a pair at a time from their own A frame, so
the injury stops moving between the two feet.
- The bounce frames had a ball painted into them while the game draws a live one
on top — he was bouncing two. The painted one is gone, and the live one now
falls on the side the sprite actually reaches for.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Three from the playtest, all code:
Every side-on sprite is DRAWN facing left, and nothing ever mirrored them, so a
zombie walking right moonwalked — obvious the moment they close on you across
your own half. They face where they last walked now. The front-facing ones (the
turned CPU, the machine, a chapter boss) have no left or right and are left alone.
The racket zombie holds a position and only moves when the ball makes him, so a
time-driven walk cycle flicked him between two frames on the spot. His stride
steps off ground covered, like the brute's — standing still is standing still.
And the pack no longer stands on the body twitching for as long as the summary is
up: once it appears they break up and shamble away up-court. Measured — feeding
at 3s, dispersed to 3m by 6.5s.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The two that kept failing land as two-figure sheets — a dragged pole or a
held-up chair is wide enough that four to a sheet either merge into one frame or
run off the canvas whatever margin the prompt asks for. The chair spectator came
out the best of the lot (0.15-0.24 to 0.42-0.52).
Also caught x_boyrun3 and x_boyrun4 sitting at the old fidelity next to the two
frames of the same run I had already redrawn — my batch list only covered half
the cycle.
The roster now averages 0.341 inner-edge density across 111 character sprites,
against 0.237 for z_mach2. What is deliberately left alone: the chapter bosses,
the judge, the ball machine and the weapon icons — Oliver named those as the ones
that were already right.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Both full sets through the same pipeline: stances and ball-bounce, serve toss,
smash and both swing frames, the four-frame run, and the five-frame death. The
opponent's ten frames with them. Inner-edge density roughly doubles across the
board — the serve frames go 0.22-0.32 to 0.41-0.54.
_regen.py retries a rejected batch itself now (default three attempts). A
rejection is usually just a bad roll — two figures drawn close enough that the
slicer sees one frame, or a limb off the canvas — and re-rolling fixes it without
me sitting in the loop.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
I had been measuring the wrong thing. The complaint is not the PNG's size or its
upscale factor, it is how fine the DRAWING is — how many pixels make up the
figure, and whether there is room in it for teeth, fingers, seams and folds. On
that, my own prompts were the cause: every sheet this session ordered "every art
pixel is a big square block about 8 screen pixels across" and "flat blocks of
colour, no shading", which is a specification for coarse art. The generator
followed it exactly.
New recipe, proven on the runner's four frames: ask for HIGH resolution — "build
the figure out of 90 to 110 pixels of height instead of 40" — and enumerate the
detail it should spend them on (teeth, sunken eyes, individual fingers, tracksuit
seams and side stripe, torn edges, ribs, laced shoes, four or five shades per
material with hatched shading). Inner-edge density went 0.15-0.22 to 0.43-0.49;
z_mach2, which Oliver holds up as the good one, sits at 0.24.
z_f1 has been clipped on its right edge since it was made — the generator ran the
figure off the sheet. The new sheets demand 150px of empty margin at every edge
and it is whole now.
The rest of the roster is still the coarse style and wants the same pass.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Audited every sprite by detecting the art-pixel BLOCK SIZE each one was actually
drawn at. The set splits cleanly in two: 29 sprites are 112 art-pixels tall on a
2-pixel block — literal 2x upscales, carrying half the detail — against 200-224
for everything drawn since. z_f3 and z_bw are in the first group, z_chairt and
z_mach2 in the second, exactly as Oliver called it.
Regenerated at full detail so far: the player's idle pair, toss and smash (he is
on screen the whole game, and his own run and death frames were already fine, so
he was mismatched against himself), plus the two wounded shamblers and the
runner's three frames — where the wound skins were the worse case, since their
newly drawn second frames were full-detail and their A frames were not.
New pipeline step for it, assets/_fine.py: detect the generator's art-pixel grid
and snap to it, common-scale in ART pixels off a chosen anchor frame (so a smash
with the arm overhead stays legitimately taller), quantise back to the sheet's
own palette, and de-fringe the key colour twice — the generator does not always
return a pure magenta and the halo survives as a rim on a green court.
Still half-resolution, in order of how much they are seen: the brute's seven
wound stages, the seven opponent frames, the racket zombie's two wound skins,
and x_ump / x_boyrun1 / x_boycarry2 / x_boycarry3.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Two of the same mistake, both called out.
The wounded feet still did not move because a mirror cannot move them: flipping
the legs swaps WHICH leg leads but keeps the two feet in the same two places, so
the spacing never changes and the body still slides. Measured it — mirrored feet
sat at -35/59 against the original's -34.5/60.5. What a walk actually needs is
the PASSING pose, feet together under the body, so the gap opens and closes.
Drawn now for all three wounded skins: 75->65, 95->68, 79->69 px between the
feet. (The mirror also clipped the steward's hanging arm into a floating
fragment, which is what Oliver spotted. Gone with it.)
The death was one sprite scaled down, which miniaturises a man rather than
killing him. It is five drawn frames now — arched back, knees, hands, face down
in the pool, a flat heap — each genuinely shorter than the last (100/84/60/47/20%
of standing height, common-scaled off one sheet) and each drawn at its own
height. No scaling anywhere in the sequence.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The pair alternated but the feet stayed put: the generator had swapped the arms
and torso and redrawn the same legs. Measured it rather than squinting — the
lower third of the two wounded frames differed by 3.7% and 4.6%, where a healthy
walk pair differs by 60-70%. That is a body sliding, which is exactly what Oliver
saw.
Regenerated with the stride as the entire brief (33% for the shambler), and where
the generator would not move them, mirrored the leg band in place instead: a
side-on walk swaps its stride under a horizontal flip of the legs alone, same
pixels, same palette, no dice roll. The coated shambler and the steward are that
(28% and 31%).
Audited every wound pair the same way while I was in there — the racket zombie's
two stages and the brute were already fine.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The old death was a red tint and a shake for half a second, then a puff of gore.
That reads as the sprite having a moment, not as being eaten.
Now it takes four and a half seconds and it is a crowd doing it. You are dragged
to your knees fighting it (new frames, p_die1/p_die2, alternating), blood coming
out of you the whole time — a constant spray and a stain that keeps widening,
with the wet work on a loop underneath. Every body on court drops what it was
doing and converges: each claims a spot in a ring around you, kept from wherever
it was standing, so they crowd in from all sides instead of stacking on one
pixel. Then you are pressed flat into the ground while the ring closes over you —
you are drawn INSIDE the crowd's z order, so the ones between you and the camera
hide you exactly as they arrive — and what is left is the mound, with them still
feeding over it when the summary finally fades in.
Also: the wounded shamblers were stepping their two frames at half the cadence of
the healthy four, which reads as frozen next to the crowd they walk in. Same
clock now. (They were animating — verified frame by frame — just too slowly.)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The pulse was drawStatic being told a height instead of reading one. _slice.py
common-scales a sheet, so a crouched frame is genuinely shorter — 211 px against
its neighbours' 224 — and forcing every frame to the same on-screen height
stretched it back up, so the body swelled and shrank once per stride. Worst on
the brute because it is the biggest and slowest. The rule already existed for the
wound stages; it now applies to every frame, once, which also settles the
shamblers and the steward (their cycles vary by up to 9%).
A chapter boss now dies in its own beat instead of under the card announcing it:
the world drops to a third speed for 1.2 s, the screen kicks, a shockwave ring
blows out through 90 extra particles and six stains, and the CHAPTER DOWN card
holds off until the pieces have landed — about 1.4 s, measured.
Cards can hold off in general now (`wait`). First cut only delayed the card's
countdown while still drawing it, which is worse than no delay: caught it in a
screenshot before it shipped.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The last two bodies still shuffling on two frames. Both get their in-between
strides, generated against their own art and fitted per channel onto it.
The chair-down stagger was walk frame 3, which a four-frame cycle would have
walked straight through — it is its own sprite now (z_sdown), picked by state
rather than by where the cycle happens to be.
Also fixed a strobe that predates all of this: z_c2's racket was drawn BLUE
while every other frame of the same zombie carries a brown one, so it flashed
once per cycle. Remapped onto z_c1's racket palette.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
It was furniture in the most literal sense: bolted to one spot, three hits from
scrap, and when it died it bled and a ball boy came out to mop it.
- It trundles to a new spot every seven seconds or so, and CANNOT fire while it
rolls. That is honest (a rolling cart cannot aim) and it is the window you use
to close on it — but it also means it stops being a landmark you can ignore.
- Six hits, not three, and it wears them: dented at two thirds, split open and
sparking at one third, smoking where it stands once it is that far gone.
- It comes apart as MACHINERY. No blood decal, no gore mound, no mop boy — a
flash, sparks, torn metal and a column of dark smoke over a scorch mark. Smoke
is a new particle flavour that rises and spreads instead of falling.
Damaged sheets keep the healthy cart's footprint: the generator drew the smoke
plume into the sprite, which would have shrunk the cart as it took damage, so
the plume is cropped off and the smoke is drawn procedurally where it can move.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A wound skin was a single still, so anything hurt froze on one frame and slid
across the court. Every skin has its …b twin now — the stride swapped, stepped
off the same clock as the healthy walk — for both shamblers, both racket-zombie
stages, and the steward, who had no wounded state at all.
The steward also died like a shambler at 3 hp, which made a bigger body read as
decoration. Five now, with a wound skin to show the second half of that. hpMax
is recorded on every body that has hp, so "hurt = show the wound" is one rule
instead of a per-variant constant to remember.
First pass at the wound frames was rejected on sight and deserved it: the
generator drew small figures with fine pixels on a GRADIENT background, and a
nearest-neighbour downscale to sprite height shredded the outlines. Regenerated
two at a time, drawn large, chunky pixels, flat background, hard black outline —
then fitted per channel onto each frame's own healthy twin.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
They spawn BEHIND the far baseline, at negative z, and the frames that step off
distance walked used a plain %, which keeps the sign of the dividend:
floor(-1.5 / 0.25) % 4 is -2, so the pick asked for 'z_g-1'. drawStatic draws
nothing for a sprite that does not exist, so the body flickered until it walked
past z=0 — worst on exactly the ones Oliver noticed, because only the heavy
bodies step off distance. The chapter boss had it too, spawning at z=-1.2 and
falling through to an undefined frame name.
One positive-modulo helper at the four picks. Verified across the whole approach
from z=-1.6: every frame resolves to a real sprite now.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Last body still walking on two frames, and the slowest thing on court, so the
lurch was the most visible. Same treatment as the player: the whole cycle
regenerated in one pass, then fitted per channel onto the mean and sd of the
frames that stay — the four wound skins — so a healthy brute and a wounded one
are the same colour (mean error about 1 of 255).
Its cycle steps off DISTANCE WALKED, not time, the same rule its wound lurch
already used: at brute pace a time-driven cycle is pure foot-slide. Four frames
over the same metre, so the cadence is unchanged.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Two frames is a lurch, and he is on screen the whole run — during a horde he is
the only thing moving. Regenerated the whole cycle in one pass rather than
bolting two new frames onto the old pair, so the four are consistent with each
other, then fitted them per channel onto the mean and sd of the frames that
stay (idle + swing): mean error under 3 of 255, so he does not change colour
when he starts moving.
The pick is frame-count driven, not hardcoded — the opponent has no run3/run4
and stays on two, and the cycle RATE is unchanged either way: more frames
subdivide the stride, they do not speed it up.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A new ordinary body between the shambler and the brute: a stadium security
steward in a hi-vis vest, 2.15 m, three hp, a touch slower. Deliberately the
mildest thing in the advanced pool — no wound skins, no special rule to learn —
so he can unlock early (game 4) and thicken the ordinary crowd, which a mix of
two shamblers never did. A fifth of horde spawns come out as stewards too, so a
grown wave is not one body dying at one range.
Sheet generated against the existing shambler walk (assets/_sheet_dwalk.png),
sliced to a 4-frame cycle, so he shambles as smoothly as the crowd he walks in.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
wuwiandClaude Opus 5